Watchlist
The Watchlist is a live, streaming table of the symbols you follow, grouped into Indices, Futures, Options and Stocks, with a summary on top. Each row updates tick by tick and can show anything from a last price to quotes, an intraday spark, a day range, a tick tape and order flow.
The toolbar
| Control | What it does |
|---|---|
| List tabs | One tab per watchlist. + makes a new list; ▾ lists every list with its count, rename and delete. |
Filter (/) | Narrows the rows by symbol or name. Enter searches every symbol to add. |
Add (A) | Opens the add row under the header, the cursor in it. |
| Columns (sliders) | The column groups, every column and its order, saved views, Save view and Reset columns. |
| Count | Rows shown of the total while a filter is on (10/12). |
| Density | Rows 28, 36 or 44 px tall. |
| ⋯, ? | New watchlist, Live sort, Headline strip, the Add Symbols dialog, Fold flow into one column, Clear symbols…, Export and Import .json, and the shortcuts. On a phone it opens as a sheet, with Sort a page down. ? opens this page. |
In a narrower panel the controls move rather than disappear: at half width the density and + go into ⋯; at a third the tabs become one list button, the filter an icon and Help a ⋯ item; at a quarter (and on a phone) the status and sorting sit in ⋯, a sheet on a phone.
The summary strip
Every figure counts the rows the filter leaves; hover a label for its definition. ⋯ ▸ Headline strip hides the strip; the choice is saved with the panel.
- List breadth: rows up ▲ and down ▼ since yesterday's close, the rows' average change % beside NIFTY 50, and stale rows apart.
- Best · Worst: the biggest gain and loss.
- Net Δ (when rows carry order flow): session buy minus sell volume × price × contract size, and how many rows are buying or selling.
- Session: the IST clock, time in and time left (NSE 09:15 to 15:30; MCX to 23:30).
Sections
Rows sort themselves into Indices, Futures, Options and Stocks. Each header shows the count, ▲/▼ breadth and the section's average under Chg %. Click a header to collapse it, drag headers to reorder sections, drag rows to reorder within a section, and use + to add into it. Sorting works inside each section; pinned rows stay on top.
Adding and removing symbols
- Add: press + on a section header (the add row opens at its foot) or
Add /
A(under the column header) and type. Results show the live price and change; ↵ adds the highlighted one, and a symbol always lands in its type's section (a future goes to Futures). The row stays for the next symbol and goes on Esc or a click elsewhere. ⇧↵ opens the full Add Symbols dialog with its type chips and Industry and Index tabs. - Remove one: hover the row and press Remove; the notice offers Undo.
- Remove all: ⋯ ▸ Clear symbols…, with Undo.
Several watchlists
Keep a list per setup. + beside the tabs creates one; ▾ switches, renames and deletes (a workspace keeps at least one).
Filtering
Press / or click the filter and type: rows narrow by symbol or name inside
their sections, and the count and the summary follow. Esc or ✕ clears
it. Filtering never removes anything.
Choosing columns
Column groups
At the top of the Columns menu, the groups add together, so Charts and Flow can be on at once:
| Group | Adds |
|---|---|
| Compact | Resets to Symbol, LTP, Chg and Chg %. |
| Trading | Bid, Ask, Spread, Last size. |
| Depth | Bid size, Ask size. |
| Charts | Spark, Range. The tape is a single column below. |
| Flow | Δ Session, Δ 15m, Buy %, OI Δ (Pro and Max). Δ 5m, CVD slope and vs VWAP are single columns below. |
Save view… names the current groups and columns; saved views are listed above the columns.
The Columns menu
Turn single columns on or off and move them with ↑ ↓, by group: Identity (Symbol, Exchange), Charts, Price (LTP, Chg, Chg %), Quote, Depth, Session (Prev close, Open, High, Low, Volume, OI) and Flow. The table's header draws a thin divider where each group starts. Reset columns returns to Compact in the default order. Choices are saved with the workspace. In a third-width panel the menu adds groups back to Symbol, Spark, LTP and Chg %.
How the values are coloured
Colour means direction only: up in green, down in red.
- LTP stays neutral; its cell is tinted by change % in five steps.
- Chg and Chg % are green when positive, red when negative.
- OI Δ stays neutral; the build-up chip beside it carries the direction (filled LB and SB as OI rises, outlined SC and LU as it falls).
- STALE: no tick for a minute inside market hours. The price greys out, an amber STALE badge replaces a misleading 0.00% (its tooltip gives the last tick time), and the row leaves the averages.
- HIGH / LOW: a new day high or low in the last five seconds tints the row and marks it.
The Charts columns
Spark
The price through today's session, the gap to the dashed previous close washed green above it and red below, with the live price as the right edge. It loads when a row scrolls into view. Hover or drag to scrub: the tooltip gives the price and time, the Day change and Δ1 from the previous point.
/help-assets/watchlist/spark-scrub.mp4Range
The session's open, high, low and price on one line. The track runs from the low to the high, a thin tick marks the open, and the body runs from the open to the price in the row's colour: green when the price is above yesterday's close, red below it. Hover for the low, the high, the open, the position as a percent and the previous close.
Tape
The last 40 trades as bars: up-ticks above the line, down-ticks below, taller for bigger moves, with an arrow for the last tick.
Flow columns
| Column | What it shows |
|---|---|
| Δ Session | Buy minus sell volume since the open. |
| Δ 15m / Δ 5m | The same over the last 15 and 5 minutes. |
| CVD slope | How fast the session's cumulative delta moved over 15 minutes, per minute. |
| Buy % | Session buy volume as a share of booked volume. |
| OI Δ | OI against the previous day's (or the first level seen today) as a change and a % of OI, with the build-up chip: LB long build-up, SB short build-up, SC short covering, LU long unwinding. |
| vs VWAP | Last price against the session VWAP. |
The ‹ on the flow group header folds the seven into one build-up column; Flow › opens them again (at half width they start folded).
How the numbers are made
- The feed delivers one-second rows with a side inferred by the backend; each second is booked like the chart's Bar Statistics, so session delta and Buy % agree with the chart.
- Each symbol is seeded from today's 1-minute footprint through the Power
Scanner's queue. Until it lands, Δ Session shows a
~(live rows only);~also marks a 15m or 5m window the data does not fully cover. - Totals cover the regular session (09:15 to 15:30 IST; MCX its evening session). After a feed drop the list seeds itself again.
- OI is a level re-sent on traded rows; equities carry none, so their OI Δ is blank.
- Spot indices print no volume or OI: their flow cells show one dim —, and its tooltip offers to add the index future (NIFTY-I, BANKNIFTY-I, FINNIFTY-I, SENSEX-I).
Flow columns are on Pro and Max; other plans see Pro in the Columns menu. Real-time flow needs the live feed, so EOD-only segments show nothing until they stream.
Sorting
Click a header: first ascending, then descending, then off; the active header shows ↑ or ↓. Every number column sorts, and Range sorts by the price's place in the range. ⋯ ▸ Live sort keeps re-sorting as prices tick (by Chg % if nothing else is sorted). At a quarter width, sorting is in ⋯.
Row actions
- Click a row to select it; linked panels follow (a linked chart loads it).
- Hover a row for its buttons at the right: Chart (
C), Option Chain, Time & Sales, Alert (at the last price), Pin (top of its section) and Remove. - Right-click, or hold a finger, for those plus Add to Watchlist, Trade and Copy symbol.
- Keys:
↑ ↓move,↵selects,Copens a chart,Aadds,/filters,?opens help. - At a quarter width rows become cards; tap one for its sheet: the price, change and spark, the previous close, open, high and low, then Day range, Quote and Order flow as rows (tap a label for its definition) and the same buttons along the foot; ⋯ opens the full menu.
/help-assets/watchlist/row-actions.mp4Saving, exporting and importing
The lists, sections, chips, saved views, columns, widths, density and sort are stored in your workspace. ⋯ ▸ Export .json writes the watchlist to a file and Import .json reads one back (older exports included).
Performance notes
All symbols share one connection and ticks are applied a few times a second, so long lists stay smooth. Sparks load only for rows on screen.
Keep Charts and Flow on a short, focused list, and use a Compact list for a long universe you only monitor.